Search

PVC pipe fitting injection moulding machine

PVC pipe fitting injection moulding machine

PVC pipe fitting injection machine This pipe fitting injection machine can use PVC raw materials to produce plastic pipe fittings (e.g. Elbow、Coupling and Union) Roughly half of the world's polyvinyl chloride resin manufactured annually is used for producing pipes for municipal and......

Send InquiryChat Now

PVC pipe fitting injection machine

图片21.png

This pipe fitting injection machine can use PVC raw materials to produce plastic pipe fittings (e.g. Elbow、Coupling and Union)

Almost half of the world's polyvinyl chloride resin manufactured annually is used for producing pipes for municipal and industrial applications. In the water distribution market it accounts for 66% of the market in the US, and in sanitary sewer pipe applications, it accounts for 75%. It is lightweight, low cost, and low cost for maintenance, all which make it attractive. However, it must be carefully installed and bedded to ensure longitudinal cracking and overbelling does not occur. Additionally, PVC pipes can be fused together using various solvent cements, or heat-fused (butt-fusion process, similar to joining HDPE pipe), creating permanent joints that are virtually impervious to leakage.

Parameter summary:

    Screw diameter:65-75mm

    Shot weight:1030-1371g

    Injection stroke:340mm

    Max. clamping force:3300KN

    Space between tie bars:660*660mm

Features:

    Many step control for speed and pressure of clamping and opening

    Double injection cylinder device featured compact construction and good equilibrant

    Variable displacement oil pump for energy-saving system

    Change electricity system as per client’s local power system

    Emergency stop device

                    Technical Parameter

                    ITEM

                    UNIT

                    SZ-3300A

                    INJECTION UNIT





                    SCREW DIAMETER

                    mm

                    65

                    70

                    75

                    SCREW L/D RATIO

                    L/D

                    21.5

                    20

                    18.7

                    THEORETICAL SHOT VOLUME

                    cm3

                    1132

                    1312

                    1506

                    SHOT WEIGHT(PS)

                    g

                    1030

                    1194

                    1371

                    INJECTION PRESSURE

                    Mpa

                    182

                    157

                    137

                    THEORETICAL INJECTION RATE (PS)

                    g/s

                    245

                    285

                    327

                    PLASTICISING CAPACITY

                    g/s

                    50

                    60

                    71

                    SCREW TORQUE

                    N.m

                    3080

                    MAX.SCREW ROTATE SPEED

                    r/min

                    160

                    INJECTION STROKE

                    mm

                    340

                    CLAMPING UNIT



                    MAX.CLAMPING FORCE

                    KN

                    3300

                    MAX.OPENING STROKE

                    mm

                    660

                    SPACE BETWEEN TIE BARS

                    mm

                    660ⅹ660

                    MOULD HEIGHT

                    mm

                    250ⅹ700

                    MAX.DAYLIGHT

                    mm

                    1360

                    EJECTOR FORCE

                    KN

                    100

                    EJECTOR STROKE

                    mm

                    165

                    EJECTOR QUANTITY


                    13

                    OTHER



                    PUMP MOTOR POWER

                    KW

                    37

                    PUMP PRESSURE

                    Mpa

                    16

                    HEATING POWER

                    KW

                    22

                    HEATING ZONE


                    5

                    SIZE

                    m

                    6.8ⅹ1.8ⅹ2.3

                    NET WEIGHT

                    t

                    12

                    OIL TANK CAPACITY

                    L/D

                    730

                    INTERNATIONAL DESIGNATION


                    3300-2060

PLATEN DIMENSION

图片22.jpg

NOZZLE POSITION

图片23.png

Related Products
Copyright © Zhangjiagang Shenzhou Machinery Co.,Ltd All Rights Reserved.